D-Link DGS-3620-52P-SI Product Manual - Page 131
IGMP Snooping Multicast VLAN Settings
View all D-Link DGS-3620-52P-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Click the Delete button to remove the corresponding entry. Click the Group List link to configure the Multicast Group Profile Address Settings for the specific entry. After clicking the Group List link, the following page will appear: Figure 4-81 Multicast Group Profile Multicast Address Settings window The fields that can be configured are described below: Parameter Description Multicast Address List Enter the multicast address list value. Click the Add button to add a new entry based on the information entered. Click the Multicast VLAN > IGMP Snooping Multicast VLAN Settings, as show below: Figure 4-82 IGMP Snooping Multicast VLAN Settings window The fields that can be configured are described below: Parameter Description IGMP Multicast VLAN State IGMP Multicast VLAN Forward Unmatched VLAN Name VID (2-4094) Remap Priority Click the radio buttons to enable or disable the IGMP Multicast VLAN state. Click the radio buttons to enable or disable the IGMP Multicast VLAN Forwarding state. Enter the VLAN Name used. Enter the VID used. 0-7 - The remap priority value (0 to 7) to be associated with the data traffic to be forwarded on the multicast VLAN. None - If None is specified, the packet's original priority is used. The default setting is None. 121