D-Link DGS-3620-52P-SI Product Manual - Page 341
Initialize Host-based Port(s), Reauthenticate Port-based Port(s)
View all D-Link DGS-3620-52P-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 341 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Initialize Host-based Port(s) This window displays the current initialized host-based ports. This window appears when the Authentication State is enabled in 802.1X Global Settings window. To view this window, click Security > 802.1X > Initialize Host-based Port(s) as shown below: Figure 8-19 Initialize Host-based Port(s) window The fields that can be configured are described below: Parameter Description Unit Select a unit you want to display. From Port / To Port Use the drop-down menus to select a range of ports to display. MAC Address Tick the check box and enter the MAC address of the Switch connected to the corresponding port, if any. Click the Apply button to accept the changes made. Reauthenticate Port-based Port(s) This window is used to display the current status of the re-authenticated port-based port(s). This window appears when the Authentication State is enabled in 802.1X Global Settings window. To view this window, click Security > 802.1X > Reauthenticate Port-based Port(s) as shown below: Figure 8-20 Reauthenticate Port-based Port(s) window The fields that can be configured are described below: Parameter Description Unit Select a unit you want to display. From Port / To Port Use the drop-down menus to select a range of ports to display. Click the Apply button to accept the changes made. Reauthenticate Host-based Port(s) This window is used to display the current status of the re-authenticated host-based port(s). This window appears when the Authentication State is enabled in 802.1X Global Settings window. To view this window, click Security > 802.1X > Reauthenticate Host-based Port(s) as shown below: 331