D-Link DGS-3620-52P-SI Product Manual - Page 210
RIPng (EI Mode Only), RIPng Global Settings
View all D-Link DGS-3620-52P-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide RX Mode Specifies the RIP receive mode Options to choose from are v1 Only, v2 Only and v1 or v2. Select Disable to disable this option. State Specifies that the RIP state will be enabled or disabled. If the state is disabled, then RIP packets will not be either transmitted or received by the interface. The network configured on this interface will not be in the RIP database. Authentication Specifies to set the state of authentication. When the authentication state is enabled, enter the password used in the space provided. Click the Apply button to accept the changes made. Click the RIPng > RIPng Global Settings, as shown below: Figure 5-63 RIPng Global Settings window The fields that can be configured are described below: Parameter Description RIPng State Click the radio buttons to enable or disable RIPng globally. The default setting is Disabled. Method Use the drop-down menu to choose from No Horizon, Split Horizon, and Poison Reverse. No Horizon - Configured to not use any horizon. Split Horizon - Configured to use basic split horizon. This is the default setting. Poison Reverse - Configured to use split horizon with poison reverse. Update Time (5-65535) Enter the value, in seconds, of the update timer. Expire Time (1-65535) Enter the interval, in seconds, of the expire timer. Garbage Collection Time (1-65535) Enter the value, in seconds, of the garbage collection timer. Click the Apply button to accept the changes made. 200