D-Link DGS-3620-52P-SI Product Manual - Page 217
MLD Group Table, L3 Features > IP Multicast Routing Protocol > MLD > MLD Group Table
View all D-Link DGS-3620-52P-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Figure 5-73 MLD Interface Settings -Edit window The fields that can be configured are described below: Parameter Description Query Interval (131744) Enter a value between 1 and 31744 seconds, with a default of 125 seconds. This specifies the interval between sending MLD queries. State Use the drop-down menu to enable or disable MLD for the IP interface. The default is Disabled. Version Use the drop-down menu to select the MLD version that will decide the interface to send and process which version packets. Max Response Time (1-25) Enter a value between 1 and 25 to specify the maximum amount of time allowed before sending an MLD response report. The default time is 10 seconds. Robustness Variable (2-7) A tuning variable to allow for subnetworks that are expected to lose a large number of packets. A value between 2 and 7 can be entered, with larger values being specified for subnetworks that are expected to lose larger numbers of packets. The default setting is 2. Last Member Query Interval (1-25) Enter a value between 1 and 25 to specify the maximum amount of time between group-specific query messages, including those sent in response to leave group messages. The default is 1 second. Click the MLD > MLD Group Table, as shown below: Figure 5-74 MLD Group Table window 207