D-Link DI-604 Product Manual - Page 9

Getting Started, Installation Location, Network Settings

Get D-Link DI-604 - Express ENwork Router PDF manuals and user guides
UPC - 790069244322
View all D-Link DI-604 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Getting Started Installation Location The DI-604 can be positioned at any convenient place in your office or house. No special wiring or cooling requirements are needed. However, you should comply with the following guidelines: Place the DI-604 on a flat horizontal plane. Keep away from any heating devices. Do not place in a dusty or wet environment. The recommended operational specifications of the DI-604 are: Temperature 32o F ~ 131o F Humidity 5 % ~ 90 % In addition, remember to turn off the power, remove the power cord from the outlet, and keep your hands dry when you install the hardware. Network Settings To use the DI-604 correctly, you have to properly configure the network settings of your computers. The default IP address of the DI-604 is 192.168.0.1, and the default subnet mask is 255.255.255.0. These addresses can be changed as needed, but the default values are used in this manual. If the TCP/IP environment of your computer has not yet been configured, you can refer to Configuring Your PCs to Connect to the DI-604 to configure it. For example: 1. Configure your computer IP as 192.168.0.3, subnet mask as 255.255.255.0 and gateway as 192.168.0.1 Or more conveniently 2. Configure your computers to obtain TCP/IP settings automatically from the DHCP server feature of the DI-604 Since the IP address of the DI-604 is 192.168.0.1, the IP address of your computer must be 192.168.0.X (where "X" is a number between 2 and 254.) Each computer on your network must have a different IP address within that range. The default gateway must be 192.168.0.1 (the IP address of the DI-604). -9-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
-9-
Getting Started
Installation Location
The DI-604 can be positioned at any convenient place in your office or
house. No special wiring or cooling requirements are needed. However,
you should comply with the following guidelines:
±
Place the DI-604 on a flat horizontal plane.
±
Keep away from any heating devices.
±
Do not place in a dusty or wet environment.
The recommended operational specifications of the DI-604 are:
Temperature
32
o
F
~
131
o
F
Humidity
5 %
~
90 %
In addition, remember to turn off the power, remove the power cord from
the outlet, and keep your hands dry when you install the hardware.
Network Settings
To use the DI-604 correctly, you have to properly configure the network
settings of your computers. The default
IP
address
of the DI-604 is
192.168.0.1
, and the default
subnet mask
is
255.255.255.0
. These
addresses can be changed as needed, but the default values are used in
this manual. If the TCP/IP environment of your computer has not yet been
configured, you can refer to
Configuring Your PCs to Connect to the
DI-604
to configure it.
For example:
1. Configure your computer
IP
as 192.168.0.3,
subnet mask
as
255.255.255.0 and
gateway
as 192.168.0.1
Or more conveniently
2.
Configure your computers to obtain TCP/IP settings automatically
from the DHCP server feature of the DI-604
Since the IP address of the DI-604 is 192.168.0.1, the IP address of your
computer must be 192.168.0.X (where “X” is a number between 2 and
254.) Each computer on your network must have a different IP address
within that range. The default gateway must be 192.168.0.1 (the IP
address of the DI-604).