D-Link DIR-632 Product Manual - Page 37

32

D-Link DIR-632 User Manual

Section 3 - Configuration

This will allow you to open a single port. If you would like to open a range of ports, refer to the next page.

Enter a name for the rule or select an application from the

drop-down menu. Select an application and click

<<

to

populate the fields.

Enter the IP address of the computer on your local network that

you want to allow the incoming service to. If your computer is

receiving an IP address automatically from the router (DHCP),

you computer will be listed in the “Computer Name” drop-down

menu. Select your computer and click

<<

.

Enter the port that you want to open next to Private Port and

Public Port. The private and public ports are usually the same.

The public port is the port seen from the Internet side, and the

private port is the port being used by the application on the

computer within your local network.

Select

TCP

,

UDP

,

Both.

or

.Other.

from the drop-down menu.

Select

Allow. All

(most common) or a created Inbound filter.

You may create your own inbound filters in the

Advanced.>.

Inbound.Filter

page.

The schedule of time when the Virtual Server Rule will be

enabled. The schedule may be set to Always, which will allow

the particular service to always be enabled. You can create your

own times in the

Tools

>

Schedules

section.

Name:

IP Address:

Private Port/

Public Port:

Protocol Type:

Inbound Filter:

Schedule:

D-Link DIR-632 Product Manual - Page 37

This will allow you to open a single port. If you would like to open a range of ports, refer to

Page 37 highlights