D-Link DSN-2100-10 User's Manual for DSN-2100-10 Valid for firmware - Page 90

Setting iSNS Enable iSNS Server IP Address iSNS Server Subnet Mask iSNS Server Port Number Heartbeat IP Address Heartbeat Subnet Mask Table 5-15. Configure System iSNS Settings Box Description Check this box to enable the other settings in the dialog box. If this box is not checked, the other settings in this dialog box are ignored. Enter the IP address of the server running the iSNS service. Enter the subnet mask of the server running the iSNS service. Enter the port number on which the server running the iSNS service s listening. The default port number is 3205. Enter the IP address from which the iSNS heartbeat originates. Typically, this address is the same as the iSNS server IP address, though it may be different. Enter the subnet mask from which the iSNS heartbeat originates. Typically, this subnet mask is the same as the iSNS server subnet mask, though it may be different. 5.4.14 Creating Scheduled Tasks You can use the management console to set up tasks you want the xStack Storage Array to perform, such as parity or media scans. When you create a task, you specify the day and time when it is to be performed and whether the task will repeat (recur). As you create scheduled tasks, record the information in Appendix B. 1. On the View menu, click Create Task. The Scheduled Task Wizard launches and the Volume and Operation screen appears (see Figure 5-42). Figure 5-42 Scheduled Task Wizard - Volume and Operation 2. Complete the fields in the screen (see Table 5-16). 3. Click Next. The Select Date and Time screen appears (see Figure 5-43). 90 Chapter 5 Configuring the xStack Storage Array