D-Link DWL-2200AP Product Manual - Page 64
DHCP client, Telnet Support, Telnet Timeout, SNMP Setting, Load Balance, User Limit, Link Integrate
UPC - 790069269004
View all D-Link DWL-2200AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Section 3 - Configuration DHCP client: Use the drop-down menu to select enabled or disabled. When enabled, the selected device(s) will function as a DHCP client(s). This allows them to receive IP configuration information from a DHCP server. When disabled, the access point(s) must have a static IP address assigned to them. Telnet Support: This selection enables or disables the ability to Telnet into the selected device(s). Telnet Timeout: This selection defines the timeout period during a Telnet session with the selected device(s). SNMP Setting: Select Enabled or Disabled. Load Balance: Select Enabled or Disabled. User Limit: When Load Balance is enabled, select the user limit. Link Integrate: Select Enabled or Disabled. Ethernet Link Displays the link status of the Ethernet connection. Status: D-Link DWL-2200AP User Manual 64