Dacor CM24 Installation Instruction - Automatic Coffee System - Page 5
Important Safety Instructions Design Specifications - cm24t
View all Dacor CM24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Important Safety Instructions Any questions or problems with this installation should be directed to your Dacor dealer or the Dacor Customer Service Department. Dacor Customer Service 1-800-793-0093 (U.S.A. and Canada) Monday - Friday 6:00 am to 5:00 pm Pacific Time e-mail: [email protected]. Web site: www.Dacor.com If the unit requires service, be sure to have the model and serial number available when you call. The model and serial number are on the data plate located inside the brewing unit door. See the use and care manual if you need instructions on how to open the front panel and brewing unit doors. Serial Number Label Design Specifications Overall Dimensions Technical Specifications All tolerances are + 1/16", - 0" unless otherwise stated. 22 1/16 (560mm) 17 5/16" (440mm) 17 9/16" (445mm) 18 3/16" (462mm) 21 9/16" (548mm) 13/16" (20mm) 23 1/2" (596mm) Overall Dimensions Power Requirements Total Connected Load Power Cord Length Unit Weight Shipping Weight Fresh Water Capacity Minimum Regulated Input Pressure Maximum Regulated Input Pressure Water inlet diameter 120V, 60Hz, 20A dedicated circuit required 1.8kW (15A) 60 inches 110 lbs. 139 lbs. 5 Liters/1.3 Gallons (Model CM24T only) 1.5 Bar (21.8 psi) at regulator output connection 3.0 Bar (43.5 psi) at regulator output connection 1/4 inch (1/4-19 BSPP thread) (Model CM24P only)