Dacor CM24 Installation Instruction - Automatic Coffee System - Page 7
Nominal Cutout Specifications
View all Dacor CM24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Planning the Installation Nominal Cutout Specifications Ventilation opening in back of cabinet 4" X 12" Min. (100mm X 300mm) Overhanging cabinet Veritical distance to overhanging cabinet Vertical Distance CM24T 14" Minimum CM24P 6" Minimum 14" Minimum 22" (559mm) Min. distance to floor of room: 1" (25.4mm) Max. recommended distance to floor of room: 36" (914mm) Coffee maker pulled out from cabinet During normal operation, the user must have access to the top of the unit. The user needs to be able to pour coffee into the coffee bins on top and, on model CM24T, be able to remove the water tank for filling and cleaning. Install the coffee maker low enough so that the user can reach the top of the unit easily when it is slid out of the cabinet. warning Electric Shock Hazard: Due to steam and spillage during normal use, DO NOT install this appliance above or below any other appliance. All tolerances are + 1/16", - 0" unless otherwise stated. 24" (610mm) 3/4" (19mm) Level Support Platform Optimal Water and Electrical Supply Location 3/4" (19mm) Min. Side Walls 17 7/8" (454mm) 8"" (203mm) 1" (26mm) 6" (152mm) min. to room floor 22 1/8" - 22 3/8" (562mm - 568mm) 1" Min. (26mm) Steam Barrier (provided) 20 3/4" (527mm) 1/8" (3mm) 22 3/16" (564mm) 3/4" (19mm) Min. Side Walls Screw 8 places (provided) 1" Min. (26mm)