Dell A920 Owner's Manual - Page 23

You can load up to: 100 sheets of plain paper 10 envelopes Make sure: The paper is designed for use with inkjet printers. • The envelopes are loaded vertically against the right side of the paper support. • The stamp location is in the upper left corner. • The envelopes are designed for use with inkjet printers. • You squeeze and slide the paper guide to the left edge of the envelope (as shown). NOTE: Do not load envelopes with: • Holes, perforations, cutouts, or deep embossing. • Metal clasps, string ties, or metal folding bars. • Exposed flap adhesive. 25 sheets of labels The labels are designed for use with inkjet printers. 10 sheets of card stock • The card stock is designed for use with inkjet printers. • The thickness does not exceed 0.025 inches. 10 greeting cards, index cards, The cards are loaded vertically against the right side of the paper postcards, or photo cards support. 25 sheets of coated, photo, or The glossy or coated side faces you. glossy paper 10 transparencies • The transparencies are designed for use with inkjet printers. • The rough side faces you. 100 sheets of custom size paper Your paper size fits within these dimensions: Width - 76 to 216 mm - 3.0 to 8.5 in. Length - 127 to 432 mm - 5.0 to 17.0 in. 25 iron-on transfers • You follow the loading instructions on the iron-on packaging. • The blank side faces you. 20 sheets of banner paper The banner paper is designed for use with inkjet printers. NOTE: To avoid smearing ink, remove each transparency or photo from the paper exit tray before the next one exits the printer. Transparencies and photos may require up to 15 minutes to dry. Using the printer 13