Dell Alienware 13 R2 Service Manual - Page 101
Replacing the camera, Procedure, Post-requisites
View all Dell Alienware 13 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Replacing the camera WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure NOTE: This chapter is applicable only if you have purchased a laptop with non-touchscreen display. 1 Using the alignment posts place the camera module on the display backcover and snap it into place. 2 Connect the camera cable to the camera module. Post-requisites 1 Replace the display panel. 2 Replace the display bezel. 3 Replace the display assembly. 4 Follow the procedure from step 5 to step 9 in "Replacing the palm rest". 5 Follow the procedure from step 3 to step 7 in "Replacing the solid-state drive". 6 Replace the base panel. 101