Dell Alienware 13 R2 Service Manual - Page 42
Replacing the touch pad, Procedure, Post-requisites
View all Dell Alienware 13 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Replacing the touch pad WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the touchpad with the screw holes on the palmrest assembly. 2 Replace the screws that secure the touchpad to the palm-rest assembly. 3 Slide the touchpad cable into the touchpad connector and press down the latch to secure the cable. Post-requisites 1 Follow the procedure from step 5 to step 9 in "Replacing the palm rest". 2 Follow the procedure from step 3 to step 7 in "Replacing the solid-state drive". 3 Replace the base panel. 42