Dell Alienware 13 R2 Service Manual - Page 51
Replacing the power-button board, Procedure, Post-requisites
View all Dell Alienware 13 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Replacing the power-button board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Slide the power-button board cable into the power-button board connector and press down the latch to secure the cable. 2 Align the screw hole on the power-button board with the screw hole on the palm-rest assembly. 3 Replace the screw that secures the power-button board to the palm-rest assembly. Post-requisites 1 Follow the procedure from step 3 to step 6 in "Replacing the keyboard". 2 Follow the procedure from step 5 to step 9 in "Replacing the palm rest". 3 Follow the procedure from step 3 to step 7 in "Replacing the solid-state drive". 4 Replace the base panel. 51