Dell Alienware 13 R2 Service Manual - Page 75
Removing the coin-cell battery, Prerequisites, Procedure
View all Dell Alienware 13 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Removing the coin-cell battery WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Removing the coin-cell battery resets the BIOS setup program's settings to default. It is recommended that you note the BIOS setup program's settings before removing the coin-cell battery. Prerequisites 1 Remove the base panel. 2 Follow the procedure from step 1 to step 5 in "Removing the solid-state drive". 3 Follow the procedure from step 1 to step 8 in "Removing the palm rest". 4 Remove the display assembly. 5 Follow the procedure from step 1 to step 5 in "Removing the power-adapter port". Procedure 1 Disconnect the coin-cell battery cable from the connector on the system board. 75