Dell Alienware Area 51 R2 Service Manual - Page 105
supply and/or system components., wattage. Ensure that you plug in the cable to the correct
View all Dell Alienware Area 51 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Procedure WARNING: The cables and ports on the back of the power supply are color-coded to indicate the different power wattage. Ensure that you plug in the cable to the correct port. Failure to do so may result in damaging the power supply and/or system components. 1 Press and hold the securing tab on the chassis and slide the power-supply unit into the chassis until it snaps into position. 1 securing tab 2 power supply unit 2 Align the notch on the power-supply cover with the tab on the chassis. 3 Slide the power-supply cover towards the tabs until it locks in place. 4 Replace the screws that secure the power-supply unit to the bezel. 5 Connect the power cable to the power-supply unit. 105
Procedure
WARNING: The cables and ports on the back of the power
supply are color-coded to indicate the different power
wattage. Ensure that you plug in the cable to the correct
port. Failure to do so may result in damaging the power
supply and/or system components.
1
Press and hold the securing tab on the chassis and slide the power-supply
unit into the chassis until it snaps into position.
1
securing tab
2
power supply unit
2
Align the notch on the power-supply cover with the tab on the chassis.
3
Slide the power-supply cover towards the tabs until it locks in place.
4
Replace the screws that secure the power-supply unit to the bezel.
5
Connect the power cable to the power-supply unit.
105