Dell Alienware Area 51 R2 Service Manual - Page 116
Replacing the Logo Board, Procedure, Post-requisites
View all Dell Alienware Area 51 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Replacing the Logo Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the logo board to the screw holes on the bracket and slide the logo board in. 2 Replace the screws that secure the logo board to the bracket. 3 Slide the logo board inside the chassis. 4 Replace the screw that secure the logo board to the bracket. 5 Route and connect the cables that you removed from the connectors on the logo board. Post-requisites 1 Replace both the left and right side-panels. See "Replacing the Side Panels". 2 Replace the stability foot. 116