Dell Alienware Area 51 R2 Service Manual - Page 129
Chipset, Security, F1 screen. Default: All, but KB.
View all Dell Alienware Area 51 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Chipset Load Level 1 OC Settings Load Level 2 OC Settings Security Supervisor Password User Password Set Supervisor Password Boot Boot Configuration Bootup Numlock State Wait for 'F1' If Error Secure Boot Control Load Legacy OPROM Set Boot Priority Boot Mode USB Boot Support Allows you to select OC Level Profile 1. Allows you to select OC Level Profile 2 Displays the supervisor password. Displays the user password. Allows you to set, change, or delete the supervisor password. The supervisor password controls access to the system setup utility. NOTE: Deleting the supervisor password deletes the user password. Set the supervisor password before setting the user password. Allows you to set the status of the Num Lock key during boot On or Off . Default: On. Allows you to enable or disable the F1 screen. Default: All, but KB. Allows you to enable or disable the secure boot control. Default: Disabled. Default: Enabled. Allows you to enable or disable USB Boot support. Default: Legacy. Allows you to enable or disable USB Boot support. Default: Enabled. 129