Dell Alienware Area 51 R2 Service Manual - Page 113
Removing the Logo Board, Prerequisites, Procedure
View all Dell Alienware Area 51 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Removing the Logo Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites 1 Remove the stability foot. 2 Remove both the left and right side-panels. See "Removing the Side Panels". 3 Remove the memory fan. Procedure NOTE: Note the routing of all cables as you remove them so that you can reroute them correctly after you replace the logo board. 1 Lay the chassis on the left side. 2 Disconnect all the cables from the connectors on the logo board. 3 Remove the screw that secure the logo board to the chassis. 113