Dell Alienware m18 R2 Owners Manual - Page 60
Installing the USB Type-C board
View all Dell Alienware m18 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Steps 1. Open the latch and disconnect the USB Type-C board cable from the connector on the USB-C Type-C board. 2. Remove the three screws (M2x4) that secure the USB Type-C board to the system-board assembly. 3. Lift the USB Type-C board shield from the left side. 4. Lift the USB Type-C board from the system-board assembly. Installing the USB Type-C board CAUTION: The information in this installation section is intended for authorized service technicians only. Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following images indicate the location of the USB Type-C board and provide a visual representation of the installation procedure. 60
Steps
1.
Open the latch and disconnect the USB Type-C board cable from the connector on the USB-C Type-C board.
2.
Remove the three screws (M2x4) that secure the USB Type-C board to the system-board assembly.
3.
Lift the USB Type-C board shield from the left side.
4.
Lift the USB Type-C board from the system-board assembly.
Installing the USB Type-C board
CAUTION: The information in this installation section is intended for authorized service technicians only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the USB Type-C board and provide a visual representation of the installation
procedure.
60