Dell Inspiron 14R 5420 Owner's Manual - Page 100
Procedure, system-board assembly
View all Dell Inspiron 14R 5420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Procedure NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS after you replace the system-board assembly. NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can reconnect them correctly after you replace the system-board assembly. 1 Disconnect the power-adapter port cable from the system-board connector. 2 Remove the screws that secure the system-board assembly to the computer base. 2 3 1 1 system-board assembly 3 screws (2) 2 power-adapter port cable 100 | Removing the System Board
100
|
Removing the System Board
Procedure
NOTE:
Your computer’s Service Tag is stored in the system board. You must enter
the Service Tag in the BIOS after you replace the system-board assembly.
NOTE:
Before disconnecting the cables from the system board, note the location
of the connectors so that you can reconnect them correctly after you replace the
system-board assembly.
1
Disconnect the power-adapter port cable from the system-board connector.
2
Remove the screws that secure the system-board assembly to the computer base.
1
system-board assembly
2
power-adapter port cable
3
screws (2)
2
3
1