Dell Inspiron 14R 5420 Owner's Manual - Page 51

Removing the Mini-Card, Prerequisites, Procedure

Page 51 highlights

19 Removing the Mini-Card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. If you ordered a wireless Mini-Card with your computer, the card is already installed. Prerequisites 1 Remove the base cover. See "Removing the Base Cover" on page 27. 2 Remove the battery. See "Removing the Battery" on page 17. 3 Remove the keyboard. See "Removing the Keyboard" on page 21. 4 Remove the palm rest. See "Removing the Palm Rest" on page 45. Procedure 1 Disconnect the antenna cables from the connectors on the Mini-Card. 2 Remove the screw that secures the Mini-Card to the connector on the system board. 1 2 3 1 screw 2 Mini-Card 3 antenna cables (2) Removing the Mini-Card | 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110

Removing the Mini-Card
|
51
19
Removing the Mini-Card
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
If you ordered a wireless Mini-Card with your computer, the card is already installed.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 27.
2
Remove the battery. See "Removing the Battery" on page 17.
3
Remove the keyboard. See "Removing the Keyboard" on page 21.
4
Remove the palm rest. See "Removing the Palm Rest" on page 45.
Procedure
1
Disconnect the antenna cables from the connectors on the Mini-Card.
2
Remove the screw that secures the Mini-Card to the connector on
the system board.
1
screw
2
Mini-Card
3
antenna cables (2)
3
1
2