Dell Inspiron 14R 5420 Owner's Manual - Page 96
Procedure, ZIF socket
View all Dell Inspiron 14R 5420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Procedure 1 To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIFsocket cam screw counterclockwise until it comes to the cam stop. CAUTION: To ensure maximum cooling for the processor, do not touch the heat transfer areas on the processor thermal cooling assembly. The oils in your skin can reduce the heat transfer capability of the thermal pads. CAUTION: When removing the processor module, pull the module straight up. Be careful not to bend the pins on the processor module. 2 Lift the processor module from the ZIF socket. 1 2 4 3 1 processor 3 pin-1 corner 2 ZIF socket 4 ZIF-socket cam screw 96 | Removing the Processor
96
|
Removing the Processor
Procedure
1
To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-
socket cam screw counterclockwise until it comes to the cam stop.
CAUTION: To ensure maximum cooling for the processor, do not touch the heat
transfer areas on the processor thermal cooling assembly. The oils in your skin
can reduce the heat transfer capability of the thermal pads.
CAUTION: When removing the processor module, pull the module straight up. Be
careful not to bend the pins on the processor module.
2
Lift the processor module from the ZIF socket.
1
processor
2
ZIF socket
3
pin-1 corner
4
ZIF-socket cam screw
2
4
1
3