Dell Inspiron 17 N7010 Inspiron 17 N7010 Service Manual - Page 24
Replacing the Palm Rest
View all Dell Inspiron 17 N7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
12. Lift and remove the display assembly off the alignment posts on the computer base. 1 display assembly 2 screws (4) 3 display cable grounding 4 display cable screw connector 5 Mini-Card antenna cables Replacing the Display Assembly 1. Follow the instructions in Before You Begin. 2. Align the display assembly with the alignment posts on the computer base. 3. Replace the four screws that secure the display assembly to the computer base. 4. Connect the display cable to the connector on the system board, and replace the display cable grounding screw. 5. Connect the Mini-Card antenna cables to the connectors on the Mini- Card. 6. Turn the computer over and replace the two screws that secure the display assembly to the computer base. 7. Replace the palm rest (see Replacing the Palm Rest). 8. Replace the keyboard (see Replacing the Keyboard). 9. Follow the instructions from step 5 to step 7 in Replacing the Hard Drive. 10. Replace the module cover (see Replacing the Module Cover). 11. Replace the optical drive (see Replacing the Optical Drive). 12. Replace the battery (see Replacing the Battery). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.