Dell Inspiron 17 N7010 Inspiron 17 N7010 Service Manual - Page 36
Replacing the I/O Board
View all Dell Inspiron 17 N7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1 I/O board 2 I/O board cable Replacing the I/O Board 1. Follow the instructions in Before You Begin. 2. Align the connectors on the I/O board with the slots on the computer base and press the I/O board until it is seated fully. 3. Replace the middle cover (see Replacing the Middle Cover). 4. Replace the display assembly (see Replacing the Display Assembly). 5. Replace the processor fan (see Replacing the Processor Fan). 6. Connect the I/O board cable to the connector on the system board. 7. Replace the palm rest (see Replacing the Palm Rest). 8. Replace the keyboard (see Replacing the Keyboard). 9. Follow the instructions from step 5 to step 7 in Replacing the Hard Drive. 10. Replace the module cover (see Replacing the Module Cover). 11. Replace the optical drive (see Replacing the Optical Drive). 12. Replace the battery (see Replacing the Battery). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Back to Contents Page