Dell Inspiron 17 N7010 Inspiron 17 N7010 Service Manual - Page 45

Replacing the Mini-Card

Get Dell Inspiron 17 N7010 PDF manuals and user guides View all Dell Inspiron 17 N7010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

1 antenna cable connectors (2) 2 screw 3 Mini-Card 10. Lift the Mini-Card out of the connector on the daughter board. Replacing the Mini-Card 1. Follow the instructions in Before You Begin. 2. Remove the new Mini-Card from its packaging. CAUTION: Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector. CAUTION: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card. CAUTION: To avoid damage to the Mini-Card, never place cables under the card. 3. Insert the Mini-Card connector at a 45-degree angle into the connector on the daughter board. 4. Press the other end of the Mini-Card down into the slot on the daughter board and replace the screw that secures the Mini-Card to the connector on the daughter board. 5. Connect the appropriate antenna cables to the Mini-Card you are installing. The following table provides the antenna cable color scheme for the MiniCard supported by your computer. Connectors on the Mini-Card Antenna Cable Color Scheme

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
10.
Lift the Mini-Card out of the connector on the daughter board.
Replacing the Mini-Card
1.
Follow the instructions in
Before You Begin
.
2.
Remove the new Mini-Card from its packaging.
3.
Insert the Mini-Card connector at a 45-degree angle into the connector on the daughter board.
4.
Press the other end of the Mini-Card down into the slot on the daughter board and replace the screw that secures the Mini-Card to the connector on
the daughter board.
5.
Connect the appropriate antenna cables to the Mini-Card you are installing. The following table provides the antenna cable color scheme for the Mini-
Card supported by your computer.
1
antenna cable connectors (2)
2
screw
3
Mini-Card
CAUTION:
Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.
CAUTION:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system
board, and realign the card.
CAUTION:
To avoid damage to the Mini-Card, never place cables under the card.
Connectors on the Mini-Card
Antenna Cable Color Scheme