Dell Inspiron 24 5410 All-in-One Service Manual - Page 42
Heat sink, Removing the heat sink
View all Dell Inspiron 24 5410 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Steps With the positive-side facing up, insert the coin-cell battery into the battery socket on the system board and snap the battery into place. Next steps 1. Install the system-board shield. 2. Install the I/O cover. 3. Install the back cover. 4. Install the stand. 5. Follow the procedure in After working inside your computer. Heat sink Removing the heat sink Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the stand. 3. Remove the back cover. 4. Remove the I/O cover. 5. Remove the system-board shield. About this task The following image indicates the location of the heat sink and provides a visual representation of the removal procedure. 42 Removing and installing components
Steps
With the positive-side facing up, insert the coin-cell battery into the battery socket on the system board and snap the battery
into place.
Next steps
1.
Install the
system-board shield
.
2.
Install the
I/O cover
.
3.
Install the
back cover
.
4.
Install the
stand
.
5.
Follow the procedure in
After working inside your computer
.
Heat sink
Removing the heat sink
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
stand
.
3.
Remove the
back cover
.
4.
Remove the
I/O cover
.
5.
Remove the
system-board shield
.
About this task
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
42
Removing and installing components