Dell Inspiron 24 5410 All-in-One Service Manual - Page 77
Table 12. System setup options-Passwords menu continued
View all Dell Inspiron 24 5410 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Table 12. System setup options-Passwords menu (continued) Passwords Default: OFF NOTE: Hard drive passwords must be cleared before the setting can be changed. Allow Non-Admin PSID Revert Enable Allow Non-Admin PSID Revert Enables or disables Non-Admin PSID Revert. Default: OFF Table 13. System setup options-Update, Recovery menu Update, Recovery UEFI Capsule Firmware Updates Enable UEFI Capsule Firmware Updates Enables or disables BIOS updates through UEFI capsule update packages. Default: ON BIOS Recovery from Hard Drive Enables the computer to recover from a bad BIOS image, as long as the Boot Block portion is intact and functioning. Default: ON NOTE: BIOS recovery is designed to fix the main BIOS block and cannot work if the Boot Block is damaged. In addition, this feature cannot work in the event of EC corruption, ME corruption, or a hardware issue. The recovery image must exist on an unencrypted partition on the drive. BIOS Downgrade Allow BIOS Downgrade Controls flashing of the system firmware to previous revisions. Default: ON SupportAssist OS Recovery Enables or disables the boot flow for SupportAssist OS Recovery tool, in the event of certain system error. Default: ON BIOSConnect Enables or disables cloud Service OS recovery if the main OS fails to boot within the number of failures equal or greater than the value specified by Dell Auto OS Recovery Threshold, and local Service does not boot, or is not installed. Default: ON Dell Auto OS Recovery Threshold Controls the automatic boot flow for SupportAssist System Resolution Console and for Dell operating system Recovery tool. Default: 2 Table 14. System setup options-System Management menu System Management Service Tag Displays the Service Tag of the computer. Asset Tag Creates a system Asset Tag that can be used by an IT administrator to uniquely identify a particular system. Once set in BIOS, the Asset Tag cannot be changed. Wake on LAN/WLAN Wake on LAN/WLAN Enable or disable Wake on LAN/WLAN. Default: Disabled System setup 77