Dell Inspiron 24 5410 All-in-One Service Manual - Page 62
Steps, Slide the display-backlight cable, touchscreen cable
View all Dell Inspiron 24 5410 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Steps 1. Remove the 10 screws (M3x5) that secure the display panel to the display-assembly base. 2. Remove the five screws (M3x3) that secure the display panel to the display-assembly base. 3. Place the computer in an upright position. 4. Holding the top corner, push the display panel away from the display-assembly base using the push holes available on the display-assembly base. 5. Slide the display-backlight cable, touchscreen cable, and display cable on the display panel through the slots on the display- assembly base. 6. Lift the display panel up from the display-assembly base. 62 Removing and installing components
Steps
1.
Remove the 10 screws (M3x5) that secure the display panel to the display-assembly base.
2.
Remove the five screws (M3x3) that secure the display panel to the display-assembly base.
3.
Place the computer in an upright position.
4.
Holding the top corner, push the display panel away from the display-assembly base using the push holes available on the
display-assembly base.
5.
Slide the display-backlight cable, touchscreen cable, and display cable on the display panel through the slots on the display-
assembly base.
6.
Lift the display panel up from the display-assembly base.
62
Removing and installing components