Dell Inspiron 24 5420 All-in-One Owners Manual - Page 51

Stand hinges, Removing the stand hinges

Get Dell Inspiron 24 5420 All-in-One PDF manuals and user guides View all Dell Inspiron 24 5420 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Steps 1. Place the I/O cover on the display-assembly base. 2. Align the screw holes on the I/O cover with the screw holes on the display-assembly base. 3. Replace the two screws (M3x5) that secure the I/O cover to the display-assembly base and snap the I/O cover back into place. Next steps 1. Install the back cover. 2. Install the stand. 3. Follow the procedure in After working inside your computer. Stand hinges Removing the stand hinges Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the stand. 3. Remove the back cover. 4. Remove the I/O cover. 5. Remove the system-board shield. NOTE: For replacement of stand or stand hinges, the replacement kit is shipped with both stand and stand hinges, and you must replace both of these components together. Refer to the procedure for removing the stand and installing the stand. About this task The following image indicates the location of the stand hinges and provides a visual representation of the removal procedure. Removing and installing Customer Replaceable Units (CRUs) 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
Steps
1.
Place the I/O cover on the display-assembly base.
2.
Align the screw holes on the I/O cover with the screw holes on the display-assembly base.
3.
Replace the two screws (M3x5) that secure the I/O cover to the display-assembly base and snap the I/O cover back into
place.
Next steps
1.
Install the
back cover
.
2.
Install the
stand
.
3.
Follow the procedure in
After working inside your computer
.
Stand hinges
Removing the stand hinges
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
stand
.
3.
Remove the
back cover
.
4.
Remove the
I/O cover
.
5.
Remove the
system-board shield
.
NOTE:
For replacement of stand or stand hinges, the replacement kit is shipped with both stand and stand hinges, and you
must replace both of these components together. Refer to the procedure for
removing the stand
and
installing the stand
.
About this task
The following image indicates the location of the stand hinges and provides a visual representation of the removal procedure.
Removing and installing Customer Replaceable Units (CRUs)
51