Dell Inspiron 24 5420 All-in-One Owners Manual - Page 82
About this task, Steps, Next steps
View all Dell Inspiron 24 5420 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
About this task The following image indicates the location of the power-button board with USB and provides a visual representation of the installation procedure. Steps 1. Connect the power-button board cable to the power-button board and close the latch to secure the cable. 2. Using the alignment tabs as reference, align and place the power-button board in the slot on the display-assembly base. 3. Replace the screw (M3x5) that secures the power-button board to the display-assembly base. 4. Adhere the tape that secures the power-button cable to the power-button board. 5. Replace the five screws (M3x4.5) that secure the left stand hinge to the display-assembly base. Next steps 1. Install the system-board shield. 2. Install the I/O cover. 3. Install the back cover. 4. Install the stand. 5. Follow the procedure in After working inside your computer. 82 Removing and installing Field Replaceable Units (FRUs)