Dell PowerConnect W-IAP3WN Dell Instant 5.0.3.0-1.1.0.0 User Guide - Page 74
Management Authentication Settings, Settings, Admin, Authentication, Internal, Username, Password
View all Dell PowerConnect W-IAP3WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Prompt Rad-Authenticator Rad-Code Rad-Id Rad-Length Reply-Message Revoke-Text Server-Group Server-Name Service-Type Session-Timeout Simultaneous-Use State Strip-User-Name Suffix Termination-Action Termination-Menu Tunnel-Assignment-Id Tunnel-Client-Auth-Id Tunnel-Client-Endpoint Tunnel-Connection-Id Tunnel-Medium-Type Tunnel-Preference Tunnel-Private-Group-Id Tunnel-Server-Auth-Id Tunnel-Server-Endpoint Tunnel-Type User-Category User-Name User-VLAN Vendor-Specific Management Authentication Settings To authenticate the Virtual Controller Management UI, perform the following steps: 1. Click the Settings link. 2. Select the Admin tab. 3. In the Authentication drop-down list, select any one of the following: Internal - Select the Username and Password specified in the respective text boxes to access the Virtual Controller Management UI. RADIUS Server - Specify one or two radius servers to authenticate UI. If two servers are configured users can use them in primary/backup mode or load-balancing mode, this is identical to the radius server configuration for SSIDs. For information on configuring external RADIUS server, see "External RADIUS Server" on page 70. 74 | Authentication Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide