Dell Precision M6400 Service Manual - Page 18
Base Assembly: Dell Precision M6400 Service Manual, Removing the Base Assembly Cover
View all Dell Precision M6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Base Assembly: Dell Precision M6400 Service Manual Back to Contents Page Base Assembly Dell Precision™ M6400 Service Manual Removing the Base Assembly Cover Replacing the Base Assembly Cover Removing the Base Assembly Replacing the Base Assembly CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. Removing the Base Assembly Cover 1. Follow the procedures in Before Working on Your Computer. 2. Close the display and turn the computer upside down. 3. Remove the two M2 x 3-mm screws. 4. Slide the cover toward the front of the computer to release the tabs from the base assembly. 5. Remove the cover from the base assembly. 1 M2 x 3-mm screws (2) 2 cover 3 bottom tabs (10) 4 front of the computer Replacing the Base Assembly Cover 1. Align the tabs with the slots on the base assembly. 2. Slide the cover toward the back of the computer to engage the tabs and firmly attach the cover to the base assembly. file:///T|/htdocs/systems/wsm6400/en/sm/base.htm[11/16/2012 10:26:22 AM]