Dell Precision M6400 Service Manual - Page 53

Replacing the Display Assembly, computer. For additional safety best practices information

Get Dell Precision M6400 PDF manuals and user guides View all Dell Precision M6400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

LED and CCFL Displays: Dell Precision M6400 Service Manual 1 M2.5 x 5-mm screws (2) on left hinge 2 M2.5 x 5-mm screws (2) on right hinge 9. Pull the wireless antenna cables up through the computer. 10. Remove the LVDS captive screw. 11. Disconnect and unroute the display cable. 12. Disconnect and unroute the ambient-light sensor cable. 13. Lift the display off the base assembly. 1 ambient-light sensor cable 2 base assembly 3 display assembly 4 antenna cables 5 LVDS captive screw 6 display cable Replacing the Display Assembly CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. 1. Align the hinges with the holes in the base assembly, and lower the display into place. 2. Replace the two M2.5 x 5-mm screws in the right hinge and the two M2.5 x 5-mm screws in the left hinge. 3. Route and connect the ambient-light sensor cable. 4. Route and connect the display cable. file:///T|/htdocs/systems/wsm6400/en/sm/displayb.htm[11/16/2012 10:27:02 AM]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
LED and CCFL Displays: Dell Precision M6400 Service Manual
file:///T|/htdocs/systems/wsm6400/en/sm/displayb.htm[11/16/2012 10:27:02 AM]
1
M2.5 x 5-mm screws (2) on left hinge
2
M2.5 x 5-mm screws (2) on right hinge
9. Pull the wireless antenna cables up through the computer.
10. Remove the LVDS captive screw.
11. Disconnect and unroute the display cable.
12. Disconnect and unroute the ambient-light sensor cable.
13. Lift the display off the base assembly.
1
ambient-light sensor cable
2
base assembly
3
display assembly
4
antenna cables
5
LVDS captive screw
6
display cable
Replacing the Display Assembly
CAUTION:
Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage on
www.dell.com at: www.dell.com/regulatory_compliance.
1. Align the hinges with the holes in the base assembly, and lower the display into place.
2. Replace the two M2.5 x 5-mm screws in the right hinge and the two M2.5 x 5-mm screws in the left hinge.
3. Route and connect the ambient-light sensor cable.
4. Route and connect the display cable.