Dell Precision M6400 Service Manual - Page 49
Replacing the Display Panel
View all Dell Precision M6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
LED and CCFL Displays: Dell Precision M6400 Service Manual 1 underside of display panel 2 cables (2) 3 cable connector 4 cable connector 5 release tabs 7. Remove two M2 x 3-mm screws along the top of the panel to remove the bracket. 1 display panel 2 M2 x 3-mm screws (2) 3 bracket Replacing the Display Panel CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. 1. Replace the two M2 x 3-mm screws to secure the bracket to the display panel. 2. Connect the cables to the connectors on the back of the display panel. 3. Place the display panel in display cover. 4. Replace the ten M2 x 3-mm screws that secure the display panel to the display cover (four screws on each side and file:///T|/htdocs/systems/wsm6400/en/sm/displayb.htm[11/16/2012 10:27:02 AM]