Dell W2600 Manual - Page 37
OSD Messages - driver
UPC - 787643502008
View all Dell W2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
www.dell.com | support.dell.com OSD Messages While using your TV, the following messages may appear. Message Auto Adjust Out of Range No Video Input TV Button Lock In Power Save Mode Press any key on keyboard or move mouse In Power Save Mode Please Check Video Signal Self Test Possible Solution No action required, the TV is performing an auto adjustment. Check the optimal resolution settings. You may need to download a new video driver. For more information, go to support.dell.com. 1 Check all cables are properly connected. 2 Ensure the proper source is selected in the Input Source menu. See "Input Select Menu" on page 26 for more information. To unlock, press Menu on your remote control, select Setup. If you are unable to use the remote control, press the volume up and the channel up buttons on the side of the TV for 10 seconds to unlock the buttons. If you have a computer connected to the TV and there is no signal detected, the TV goes in to sleep mode. The power light is amber when the TV in is sleep mode. Press any key on the keyboard or move the mouse to wake the TV. If you are using a video device and it has been inactive for 30 minutes the TV goes in to power save mode. The power light is amber when the TV is in power save mode. Appears for computer source when there is nothing plugged in. Select VGA or DVI from Input Select menu and nothing is plugged in. Plug a computer in to the VGA or DVI. 38 Troubleshooting Your TV