Dell XPS Gen 4 Owner's Manual - Page 98
CD/DVD Drive, Removing a CD/DVD Drive
View all Dell XPS Gen 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
www.dell.com | support.dell.com 3 Attach the power and data cables to the floppy drive. 4 Connect the other end of the data cable to the connector labled FLOPPY on the system board (see page 75). 5 Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents. 6 Close the computer cover (see page 114). NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 7 Connect your computer and devices to electrical outlets, and turn them on. See the documentation that came with the drive for instructions on installing any software required for drive operation. 8 Enter system setup (see page 119) and update the appropriate Diskette Drive option. 9 Verify that your computer works correctly by running the Dell Diagnostics (see page 56). CD/DVD Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. Removing a CD/DVD Drive 1 Follow the procedures in "Before You Begin" on page 67. 2 Disconnect the power and data cables from the back of the drive. 98 Removing and Installing Parts