Denon 589BA Owners Manual - Page 29

3. Option Setup Make various other settings. a ~ d f g h Volume Control Auto Surround Mode Direct Mode Setup Remote ID Setup a ~ d Volume Control Set the main zone volume setting. [Display] 1.Sp 2.In 3.Op E Option Setup E 1 Limit :OFF E 2 P.On :Last E 3 Mute :Full a Volume Limit Make a setting for maximum volume. [Selectable items] OFF : Do not set a maximum volume. -20dB : Set the maximum volume to -20 dB. -10dB : Set the maximum volume to -10 dB. 0dB : Set the maximum volume to 0 dB. ENGLISH s Power On Level This sets the volume set when the main zone's power is turned on. [Selectable items] Last : Use the memorized setting from the last session. - - - : Always use the muting on condition when power is turned on. [Variable range] -80dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB. b The variable level when upper limit has been set with "Volume Limit" is "-80 dB ~ the set volume level". d Mute Level This sets the amount of attenuation of the volume when the mute mode is set in the main zone. [Selectable items] Full : The sound is cut off entirely. -40dB : The sound is attenuated by 40 dB. -20dB : The sound is attenuated by 20 dB. f Auto Surround Mode Make setting for memorizing surround mode setting for each input signal type. [Display] 1.Sp 2.In 3.Op E Option Setup E 4AutoSurr.:ON [Selectable items] ON : Memorize settings. Most recently stored surround mode is automatically selected. OFF : Do not memorize settings. Surround mode does not change according to input signal. The auto surround mode function lets you store in the memory the surround mode last used for playing the three types of input signals listed below. q Analog and PCM 2-channel signals (STEREO) w 2-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY PLg Cinema) e Multi-channel signals of Dolby Digital, DTS or other multichannel format (DOLBY/DTS SURROUND) b Default settings are indicated in ( ). g Direct Mode Setup Select MultEQ use for DIRECT mode playback. [Display] 1.Sp 2.In 3.Op E Option Setup E 5 Direct :OFF [Selectable items] ON : Use MultEQ. OFF : Do not use MultEQ. h Remote ID Setup Set remote control ID. [Display] 1.Sp 2.In 3.Op E Option Setup E 6 Remote ID:1 [Selectable items] 1 2 3 4 NOTE When using the AVR-589 with only the included remote control unit (RC-1104), there is no need to make settings. When using a separately sold remote control unit (RC-7000CI, etc.), this function can be used. Match the ID setting of the remote control unit and the receiver. For details on how to select, set and cancel settings for each menu, see "System Setup Operation" (vpage 20). 26 Getting Started Connections Setup Playback Remote Control Information Troubleshooting Specifications