Denon 589BA Owners Manual - Page 54

Getting Started Connections Setup Playback Remote Control Information Troubleshooting Specifications ENGLISH GAudioH Symptom Cause Countermeasure No sound is • You are playing a monaural • The mode is set to something produced from source (TV, AM radio broadcast, other than "STANDARD" (Dolby/ center speaker. etc.) in the "STANDARD" (Dolby/ DTS Surround). DTS Surround) mode. No sound • The surround mode is set to • Set to a surround playback is produced "STEREO" or "DIRECT". mode. from surround speakers. No sound is • Subwoofer's power not turned • Turn on the subwoofer's power. produced from on. subwoofer. • The "Subwoofer" setting at • Set to "Yes". "Speaker Setup" is set to "No". • The subwoofer is not properly • Check the connections. connected. • The subwoofer's volume is • Adjust the subwoofer's volume turned off. to an appropriate level. No test tones are • Surround mode not set to • Set to the "STANDARD"(Dolby/ produced when " S TA N D A R D " ( D o l b y / D T S DTS Surround) mode. remote control Surround). unit's TEST button is pressed. DTS sound is not • DVD player's audio output setting • Set the DVD player. For details, output. is not set to bitstream. refer to the DVD player's operating instructions. • DVD player is not compatible • Use a DTS-compatible player. with DTS sound playback. • The AVR-589's "Input Mode" • Set to the "Auto" or "DTS" setting is set to other than mode. "DTS". GVideoH Symptom No picture appears. DVDs cannot be copied on a VCR. Cause Countermeasure • The connections between the • Check the connections. AVR-589 and monitor are faulty. • The connection terminal of the • Because video signals are output AVR-589 and the connection from the AVR-589's monitor terminal of the monitor are not of output terminal in the same the same type. format as the video input signals, the monitor output terminal should be of the same type as the terminal used for input. • This is not a malfunction. Most - movie software includes copy prevention signals and cannot be copied. Page 27 28 - 21 9 40 27 - - 34 Page 10 ~ 13 - - - GHDMIH Symptom HDMI audio signals are not output from speakers. No picture appears with HDMI connections. No sound is output from the monitor connected with HDMI connections. GiPodH Symptom iPod cannot be played. Cause Countermeasure • The audio signal input to the HDMI input connector cannot be - played on the AVR-589. Input the audio signal to the digital audio input connector or analog audio input connector. • The connections to the HDMI • Check the connections. connectors are faulty. • HDMI input setting is improper. • Check the HDMI input setting. • The HDMI format of the player • Match the HDMI format of the and monitor do not match. player and monitor. • HDMI input setting is improper. • Check the HDMI input setting. Cause Countermeasure • The input source assigned to • Switch to the input source control dock for iPod is not assigned at control dock for selected. iPod. • Cable is not properly connected. • Reconnect. • Control dock for iPod's AC • Plug the control dock for iPod's adapter is not connected to AC adapter into a power outlet. power outlet. Page 10 10 23 10 23 Page 24 12 - 51