Denon 589BA Owners Manual - Page 44
Quick Select Function, Personal Memory Plus Function, Last Function Memory, Backup Memory, Resetting
UPC - 883795000673
View all Denon 589BA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Getting Started Connections Setup Playback Remote Control Information Troubleshooting Specifications ENGLISH Symbols used to indicate buttons in this manual Button located on both the main unit and the remote control unit BUTTON Button only on the main unit Button only on the remote control unit [BUTTON] QUICK SELECT [Front] [QUICK SELECT] Quick Select Function With this function, the currently playing input source, volume level, surround mode, MultEQ, Dynamic Volume, DV setting and front speaker can be stored in the memory. 1 Set the input source, input mode, surround mode, MultEQ settings and volume to the conditions you want to store. 2 Press and hold QUICK SELECT until "Memory" appears on the display. The current settings will be memorized. Last Function Memory This stores the settings as they were directly before the standby mode was set. When the power is turned back on, the settings are restored to as they were directly before the standby mode was set. Backup Memory The various settings are backed up for about 1 week, even if the power is turned off or the power cord is disconnected. [Quick Select Defaults] Quick Select 1 Quick Select 2 Quick Select 3 Input Source DVD/HDP TV/CBL VCR Volume -40 dB -40 dB -40 dB To call out the settings, press QUICK SELECT at which the desired settings were stored. Personal Memory Plus Function This function sets the settings (input mode, surround mode, MultEQ, Dynamic EQ, Dynamic Volume, audio delay etc.) last selected for the individual input sources. When you switch to an input source, the settings are automatically set to the ones that were set the last time that input source was used. Resetting the Microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. 1 Turn off the power using . 2 Press while simultaneously pressing and . 3 Once the display starts flashing at intervals of about 1 second, release the two buttons. If in step 3 the display does not flash at intervals of about 1 second, start over from step 1. The surround parameters, tone control, MultEQ settings and the volumes of the different speakers are stored for the individual surround modes.