Dewalt DW715 Instruction Manual - Page 6

Perpendicularity, Parallelism - miter saw table

Get Dewalt DW715 PDF manuals and user guides View all Dewalt DW715 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

English 4. PERPENDICULARITY: The line should be aligned vertically with the cut from the top of the board to the bottom, as shown. With the miter saw head in the UP position, place board vertically against fence. Adjust the top E screw (E) to align laser to the cut. 5. PARALLELISM: The laser should be aligned with the cut from front of board to the fence. With the miter saw head in the UP position, lay board flat on table and against fence. Adjust F front screw (F) to align laser to the cut. Rotate the miter saw guard if necessary. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
English
5
4.
PERPENDICULARITY
: The line
should be aligned vertically with
the cut from the top of the board
to the bottom, as shown.
With the miter saw head in the
UP position, place board verti-
cally against fence. Adjust the top
screw (E) to align laser to the cut.
E
5.
PARALLELISM
:
The
laser
should be aligned with the cut
from front of board to the fence.
With the miter saw head in the
UP position, lay board flat on
table and against fence. Adjust
front screw (F) to align laser to
the cut. Rotate the miter saw
guard if necessary.
F