Dynex DX-PDVD7 User Manual (English) - Page 23

Specifications 23 • If running on battery power: • Make sure that the battery is secured in place on the back of the DVD player. • Make sure that the battery is fully charged. • Make sure that the battery and AC power adapter are not both plugged in. If so, disconnect the AC power adapter. Specifications Laser Semiconductor laser Wavelength 650 nm~795 nm Video system NTSC Compatible discs DVD/DVD+R/DVD+RW/DVD-R/DVD-RW/CD/ CD-R/CD-RW/MP3 Frequency response 20 Hz ~ 20 KHz Signal/noise ratio > 60dB Dynamic range > 85dB Power supply DC 9V Rechargeable Ni-Mh battery Operating temperature 41 ~ 95°F (5 ~ 35°C) Screen size 7 inches Dimensions W × D × H 7.96 × 6.29 × 1.47 inches (195 × 154 × 36 mm) Weight 1.79 lbs (0.81 kg) Changes to the design and specifications may be made without notice. FCC statement FCC warning This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.The user could lose the authority to operate this equipment if an unauthorized change or modification is made. Caution: Any change or modification to the player not expressly approved by the manufacturer or its authorized parties could void your authority to operate the player. Laser safety Location: Inside, near the deck mechanism. This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.