Edimax EW-7206APg User Manual - Page 25

3.2.6 System Utility From here, you can define the Access Point's IP Address and Login Password and enable the Access Point to be a DHCP Server. You can change AP's IP address to meet your network IP range so you can log in to set up page easily next time. Parameter Current Password New Password Re-Enter Password IP Address Subnet Mask Gateway Address DHCP Server Description Enter the current password (up to 15-digit alphanumeric string) of the Access Point. The default password for the Access Point is 1234. Note that the password is case-sensitive. Enter the password (up to 15-digit alphanumeric string) you want to login to the Access Point. Note that the password is case-sensitive. Reconfirm the password (up to 15-digit alphanumeric string) you want to login to the Access Point. Note that the password is case-sensitive. Designate the Access Point's IP Address. This IP Address should be unique in your network. The default IP Address is 192.168.2.1. Specify a Subnet Mask for your LAN segment. The Subnet Mask of the Access Point is fixed and the value is 255.255.255.0. The IP address of the default gateway of the subnet that this access point resides in. It allows this access point be accessed by PC from deferent subnet to do configuration. Enable or disable the DHCP Server. Click Apply button at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the Access Point.