Edimax EW-7206APg User Manual - Page 4

DC Adapter Port - factory reset

Get Edimax EW-7206APg PDF manuals and user guides View all Edimax EW-7206APg manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

y Certification: FCC, CE 1.4 Physical Description Front Panel On the Access Point's front panel there are LED lights to inform you of the Access Point's current status. Below is an explanation of each LED. EW-7206APg EW-7206PDg LED Power Color Green Wireless Activity Green LAN Link/Activity Green Status Lit Off Flash Off On Flash Off Description Power is supplied. No Power. Antenna is transmitting or receiving data. Antenna is not transmitting or receiving data. A valid link is established. It is transmitting or receiving data. No link is established. Back Panel Access Point's connection ports are located on the back panel. Below is the description of each connection port. y Antenna Connector This round connection is standard Reverse SMA connector where any antennas with Reverse SMA connector can connect to the Access Point. y DC Adapter Port Insert the power jack of the power adapter into this port. y LAN Port z The Access Point's LAN port is where you connect to your LAN's network devices with RJ45 cables. z Reset The reset button has two functions. 1. If you want to reboot the Access Point, use a pencil tip to press the reset button no more than 4 seconds. 2. If you press and hold the reset button for more than 4 seconds, the Access Point will reset to the factory defaults (Warning: Your settings will be deleted and replaced with the factory default settings).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
y
Certification: FCC, CE
1.4
Physical Description
Front Panel
On the Access Point’s front panel there are LED lights to inform you of the Access Point’s current status.
Below is an explanation of each LED.
EW-7206APg
EW-7206PDg
LED
Color
Status
Description
Power
Green
Lit
Power is supplied.
Off
No Power.
Wireless Activity
Green
Flash
Antenna is transmitting or receiving data.
Off
Antenna is not transmitting or receiving data.
LAN
Link/Activity
Green
On
A valid link is established.
Flash
It is transmitting or receiving data.
Off
No link is established.
Back Panel
Access Point’s connection ports are located on the back panel. Below is the description of each connection
port.
y
Antenna Connector
This round connection is standard Reverse SMA connector where any antennas with Reverse SMA
connector can connect to the Access Point.
y
DC Adapter Port
Insert the power jack of the power adapter into this port.
y
LAN Port
z
The Access Point’s LAN port is where you connect to your LAN’s network devices with RJ45 cables.
z
Reset
The reset button has two functions.
1.
If you want to reboot the Access Point, use a pencil tip to press the reset button no more than 4 seconds.
2.
If you press and hold the reset button for more than 4 seconds, the Access Point will reset to the factory
defaults (Warning: Your settings will be deleted and replaced with the factory default settings).