Edimax HP-5101Wn User Manual - Page 15
II-2. iQ Setup., II-4., Connecting to your HP-5101Wn.
View all Edimax HP-5101Wn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
II-3. WPS Setup If your wireless router/access point supports WPS (Wi-Fi Protected Setup) then you can use this method to set up your HP-5101Wn's Wi-Fi network. WPS is an alternative to II-2. iQ Setup. The HP-5101Wn's Wi-Fi settings (including SSID) will be the same as your existing router/access point. 1. Press the WPS button (often the WPS/Reset button) on your router/access point to activate WPS. Please check the instructions for your wireless router/access point for how long you need to hold down its WPS button to activate WPS. Take care not to hold the WPS button for too long - this may result in inadvertently resetting the extender or router/access point. 2. Within two minutes, press and hold the WPS button for 2-5 seconds on the HP-5101Wn to activate its WPS. The HP-5101Wn's WPS LED should flash to indicate a WPS connection is in progress. 3. The devices will establish a connection. The HP-5101Wn's WPS LED should display on to indicate a successful connection. You can now connect to the HP-5101Wn's wireless network with a Wi-Fi device, as described in II-4. Connecting to your HP-5101Wn. 15