Edimax HP-5101Wn User Manual - Page 8
Creating A Powerline Network - installation
View all Edimax HP-5101Wn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
II. CREATING A POWERLINE NETWORK A minimum of two Powerline devices are required to establish a Powerline network. For best performance, plug Powerline adapters directly into standard wall sockets. Avoid using multi-socket adapters. It may be convenient to install and configure your Powerline adapters in the same room, and then relocate the HP-5101Wn to its preferred location after setup is complete. II-1. Hardware Installation 1. Connect one Powerline adapter to your router via Ethernet cable and plug it into a power socket. The power and LAN LEDs should display on. 2. Plug another Powerline adapter (HP-5101Wn) into a power socket, and confirm the power LED is on. 3. The PLC LED on both Powerline adapters should indicate first that they are detecting a Powerline connection, and then that a Powerline connection is established. See LED Status for HP-5101Wn LEDs. 8