Electrolux E23BC69SPS Complete Owners Guide English - Page 15
Installing Door Handles, Door Handle Mounting Instructions
View all Electrolux E23BC69SPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installing Door Handles 15 Door Handle Mounting Instructions CAUTION Wear gloves and safety goggles. Use extreme CAUTION when installing these handles. 1. Remove handles from protective packaging. 2. Position fresh food handle end caps (A) over upper and lower pre-installed shoulder bolts (B) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door. 3. While holding handle firmly against door, fasten upper and lower Allen set screws (C) with supplied Allen wrench. NOTE An Allen wrench is supplied in the handle packaging. When using the Allen wrench to tighten the Allen set screws (C), it is imperative that force be applied to the longer arm of the Allen wrench to ensure that the set screws are completely tightened so that handles are flush with doors/drawer. 4. Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are facing towards the first door. End Cap End Cap Mounting Refrigerator Handles End End Cap Cap 5. Position freezer handle end caps over left and right pre-installed shoulder bolts (B) that are fastened to the drawer, ensuring the holes for the set screws are facing down. 6. While holding handle firmly against drawer, fasten left and right Allen set screws (C) with supplied Allen wrench. Mounting Freezer End Cap Handle End Cap