Electrolux E23BC69SPS Complete Owners Guide English - Page 7

Installation 7 Installation • Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections: Sides & Top 3/8 inch (9.5 mm) Back 1 inch (25.4 mm) NOTE If your refrigerator is placed with the door hinge against a wall, you may have to allow additional space so the door can be opened wider. Door opening NOTE The refrigerator doors are designed to shut by themselves within a 45 degree opening. Your refrigerator should be positioned to allow easy access to a counter when removing food. For best use of refrigerator drawers and freezer baskets, the refrigerator should be in a position where both can be fully opened. Cabinet Leveling & Refrigerator Door Alignment (if necessary) Guidelines for final positioning of your refrigerator: • All four corners of the cabinet must rest firmly on the floor. • The front should be slightly elevated to ensure that doors close and seal properly. • Doors should align with each other and be level. Most of these conditions can be met by raising or lowering the adjustable front rollers. To level the cabinet using the front rollers: 1 Slightly open freezer drawer if the toe grill is installed. Lift the toe grille and gently pull forward. 2 Make initial cabinet adjustments by using the front roller height adjusting screws. Use a 3/8 inch socket wrench to turn the adjustment screws (1 per side). To raise: turn adjustment screw clockwise. To lower: turn adjustment screw counterclockwise. CAUTION Do Not loosen or remove these 3 hex screws. Anti-tip Leg Raise DO NOT Loosen or Remove These 3 Hex Screws Lower