Electrolux E23BC69SPS Complete Owners Guide English - Page 9
CAUTION, Reposition the Air Seal, select models
View all Electrolux E23BC69SPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2 Relock shelf by pushing the slide mechanism away from you. Installation 9 3 While holding shelf at a 45-degree angle with the gray handle facing you, push the shelf into the back of the hanger. 6 Lift the hanger directly upwards and pull toward you to remove it from the ladder. CAUTION Shelves must be removed prior to moving the refrigerator. 4 Gently set the shelf onto the hanger once the back is secured by the hanger. Reposition the Air Seal (select models) 1 Remove air seal by pushing seal straight back. 2 Position the air seal towards the outside edge of the shelf to avoid the air tower when shelf is pushed back into place. 3 Install seal by sliding the open channel end of the seal onto back edge of shelf until seal sits snug on back of shelf and flap sits at about a 10 degree angle from shelf surface. Air Seal 5 Remove shelf from its locked position by pulling the slide mechanism toward you. Air Seal