Electrolux E23CS78HPS Owners Guide - Page 13

Controls & Settings 13 Choosing Fahrenheit or Centigrade Depending on which temperature standard you prefer to use, you can set your control panel to display in fahrenheit or centigrade. To change between fahrenheit and centigrade, press the Mode button (located between the two digital temperature displays). Making Temperature Adjustments Press to alternate between Fahrenheit and Centigrade After running your refrigerator for 24 hours, you can adjust temperatures as needed. Make your adjustments small and gradual, allowing time for temperatures to change and stabilize. Refer to the following guidelines for temperature settings. Temperature Control Range Freezer Fresh Food Fahrenheit Centigrade Fahrenheit Centigrade Warmer Warmest 6° -14° 47° 8° Factory Setting Midpoint 0° -18° 37° 3° Colder Coldest -6° -21° 33° 1° Temperature Adjustment Guide If Fresh Food compartment is too warm Adjust Fresh Food control one degree colder by pressing Down Arrow button. If Fresh Food compartment is too cold Adjust Fresh Food control one degree warmer by pressing the Up Arrow button. If Freezer compartment is too warm Adjust Freezer control one degree colder by pressing Down Arrow button. If Freezer compartment is too cold Adjust Freezer control one degree warmer by pressing the Up Arrow button. What To Do If The Temperature Displays Flash If ever you you see both temperature displays continuously flashing, it may indicate that the control system has detected a performance problem. Call your Electrolux service representative, who can interpret the flashing message.